login as: ubuntu ubuntu@192.168.0.222's password: Welcome to Ubuntu 14.04.1 LTS (GNU/Linux 3.10.40-g8c4516e armv7l) * Documentation: https://help.ubuntu.com/ Last login: Fri Nov 28 08:36:05 2014 ubuntu@tegra-ubuntu:~$ sudo su [sudo] password for ubuntu: root@tegra-ubuntu:/home/ubuntu# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.40-g8c4516e (buildbrain@mobile-u64-719) (gcc version 4.5.3 (crosstool-NG hg_unknown@20110628.165246) ) #1 SMP PREEMPT Tue Oct 7 19:18:58 PDT 2014 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine: jetson-tk1, model: NVIDIA Tegra124 PM375, serial: 0 [ 0.000000] Truncating memory at 0x80000000 to fit in 32-bit physical address space [ 0.000000] Found vpr, start=0xf6900000 size=9700000 [ 0.000000] Found tsec, start=0xf4900000 size=2000000<6>[ 0.000000] Found tegra_fbmem: 01f60000@ad012000 [ 0.000000] Tegra reserved memory: [ 0.000000] LP0: f46ff000 - f46ff80f [ 0.000000] Bootloader framebuffer: ad012000 - aef71fff [ 0.000000] Bootloader framebuffer2: 00000000 - 00000000 [ 0.000000] Framebuffer: eec00000 - efdfffff [ 0.000000] 2nd Framebuffer: efe00000 - f45fffff [ 0.000000] Carveout: 00000000 - 00000000 [ 0.000000] Vpr: f6900000 - ffffffff [ 0.000000] Tsec: f4900000 - f68fffff [ 0.000000] cma: CMA: reserved 16 MiB at ac000000 [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] On node 0 totalpages: 453632 [ 0.000000] free_area_init_node: node 0, pgdat c0ce4cc0, node_mem_map c0e09000 [ 0.000000] Normal zone: 1520 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2204 pages used for memmap [ 0.000000] HighMem zone: 259072 pages, LIFO batch:31 [ 0.000000] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/arch/arm/boot/dts/tegra124-jetson_tk1-pm375-000-c00-00.dts [ 0.000000] Tegra12: CPU Speedo value 2296, Soc Speedo value 2260, Gpu Speedo value 2110 [ 0.000000] Tegra12: CPU Speedo ID 1, Soc Speedo ID 1, Gpu Speedo ID 1 [ 0.000000] Tegra12: CPU Process ID 1,Soc Process ID 1,Gpu Process ID 1 [ 0.000000] Tegra Revision: A01 SKU: 0x81 CPU Process: 1 Core Process: 1 [ 0.000000] tegra: PLLP fixed rate: 408000000 [ 0.000000] tegra_clk_shared_bus_user_init: c2bus client se left ON [ 0.000000] tegra_clk_shared_bus_user_init: c4bus client vi left ON [ 0.000000] Lowering cpu_lp maximum rate from 1350000000 to 1092000000 [ 0.000000] Lowering sbus maximum rate from 420000000 to 384000000 [ 0.000000] Lowering vic03 maximum rate from 900000000 to 828000000 [ 0.000000] Lowering tsec maximum rate from 900000000 to 828000000 [ 0.000000] Lowering msenc maximum rate from 600000000 to 528000000 [ 0.000000] Lowering se maximum rate from 600000000 to 528000000 [ 0.000000] Lowering vde maximum rate from 600000000 to 528000000 [ 0.000000] Lowering host1x maximum rate from 500000000 to 444000000 [ 0.000000] Lowering vi maximum rate from 700000000 to 600000000 [ 0.000000] Lowering isp maximum rate from 700000000 to 600000000 [ 0.000000] Lowering c4bus maximum rate from 700000000 to 600000000 [ 0.000000] Lowering pll_c maximum rate from 1400000000 to 1066000000 [ 0.000000] Lowering pll_c2 maximum rate from 1200000000 to 1066000000 [ 0.000000] Lowering pll_c3 maximum rate from 1200000000 to 1066000000 [ 0.000000] Lowering hdmi maximum rate from 594000000 to 297000000 [ 0.000000] Lowering sdmmc1 maximum rate from 208000000 to 204000000 [ 0.000000] Lowering sdmmc3 maximum rate from 208000000 to 204000000 [ 0.000000] Lowering gbus maximum rate from 1032000000 to 852000000 [ 0.000000] Lowering cpu_g maximum rate from 3000000000 to 2320500000 [ 0.000000] tegra dvfs: VDD_CPU nominal 1260mV, scaling enabled [ 0.000000] tegra dvfs: VDD_CORE nominal 1150mV, scaling enabled [ 0.000000] tegra dvfs: VDD_GPU nominal 1200mV, scaling enabled [ 0.000000] Switching to timer-based delay loop [ 0.000000] tegra_powergate_init: DONE [ 0.000000] tegra12_plle_clk_enable: pll_e is already enabled [ 0.000000] PERCPU: Embedded 9 pages/cpu @c1cc0000 s15360 r8192 d13312 u36864 [ 0.000000] pcpu-alloc: s15360 r8192 d13312 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 452112 [ 0.000000] Kernel command line: console=ttyS0,115200n8 console=tty1 no_console_suspend=1 lp0_vec=2064@0xf46ff000 video=tegrafb mem=1862M@2048M memtype=255 ddr_die=2048M@2048M section=256M pmuboard=0x0177:0x0000:0x02:0x43:0x00 vpr=151M@3945M tsec=32M@3913M otf_key=c75e5bb91eb3bd947560357b64422f85 usbcore.old_scheme_first=1 core_edp_mv=1150 core_edp_ma=4000 tegraid=40.1.1.0.0 debug_uartport=lsport,3 power_supply=Adapter audio_codec=rt5640 modem_id=0 android.kerneltype=normal usb_port_owner_info=0 fbcon=map:1 commchip_id=0 usb_port_owner_info=0 lane_owner_info=6 emc_max_dvfs=0 touch_id=0@0 tegra_fbmem=32899072@0xad012000 board_info=0x0177:0x0000:0x02:0x43:0x00 root=/dev/mmcblk0p1 rw rootwait tegraboot=sdmmc gpt [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1772MB = 1772MB total [ 0.000000] Memory: 1735480k/1735480k available, 171208k reserved, 1036288K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0b2d860 (11415 kB) [ 0.000000] .init : 0xc0b2e000 - 0xc0bacc00 ( 507 kB) [ 0.000000] .data : 0xc0bae000 - 0xc0cfcd0c (1340 kB) [ 0.000000] .bss : 0xc0cfcd0c - 0xc0d87a2c ( 556 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:960 [ 0.000000] the number of interrupt controllers found is 5 [ 0.000000] Architected local timer running at 12.00MHz (phys). [ 0.000000] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns [ 0.000000] Ignoring duplicate/late registration of read_current_timer delay [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty1] enabled [ 0.003863] Calibrating delay loop (skipped), value calculated using timer frequency.. lpj=12000 [ 0.003934] pid_max: default: 32768 minimum: 301 [ 0.004252] Mount-cache hash table entries: 512 [ 0.025367] Initializing cgroup subsys debug [ 0.025410] Initializing cgroup subsys freezer [ 0.025517] CPU: Testing write buffer coherency: ok [ 0.025589] ftrace: allocating 32945 entries in 65 pages [ 0.067003] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.067049] Setting up static identity map for 0xc08003d0 - 0xc0800474 [ 0.071039] ftrace: Allocated trace_printk buffers [ 0.078736] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.081750] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.084794] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.084986] Brought up 4 CPUs [ 0.085049] SMP: Total of 4 processors activated. [ 0.085067] CPU: All CPU(s) started in SVC mode. [ 0.085930] devtmpfs: initialized [ 0.095225] pinctrl core: initialized pinctrl subsystem [ 0.095533] regulator-dummy: no parameters [ 0.096245] NET: Registered protocol family 16 [ 0.098715] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.100000] tegra_smmu tegra_smmu: Loaded Tegra IOMMU driver [ 0.100832] cpuidle: using governor ladder [ 0.100853] cpuidle: using governor menu [ 0.104807] ardbeg_camera_auxdata: update camera lookup table. [ 0.113714] tegra-gpio 6000d000.gpio: Initialising GPIO state 0: name default [ 0.114322] gpiochip_add: registered GPIOs 0 to 255 on device: tegra-gpio [ 0.121050] Wake16 for irq=34 [ 0.123478] Wake58 for irq=81 [ 0.123526] Wake41 for irq=129 [ 0.123541] Wake43 for irq=129 [ 0.123583] Wake40 for irq=53 [ 0.123598] Wake42 for irq=53 [ 0.127769] board_info: id:sku:fab:major:minor = 0x0177:0x0000:0x03:0x45:0x00 [ 0.127866] board_info: id:sku:fab:major:minor = 0x0177:0x0000:0x03:0x45:0x00 [ 0.127930] disp1 pclk=154700000 [ 0.127940] disp2 pclk=297000000 [ 0.127948] Selecting UARTD as the debug console [ 0.127991] The debug console clock name is uartd [ 0.128399] ardbeg_modem_init: modem_id = 0 [ 0.131004] Clear bootloader IO dpd settings [ 0.131222] Loading jetson TK1 EMC tables. [ 0.131469] tegra: pll_m is selected as scalable EMC clock source [ 0.131510] Lowering emc maximum rate from 1200000000 to 924000000 [ 0.131536] tegra: validated EMC DFS table [ 0.131668] laguna_edp_init: CPU regulator 15000 mA [ 0.477646] laguna_edp_init: GPU regulator 8000 mA [ 0.477683] swapper/0 isomgr_init(): iso emc max clk=924000KHz [ 0.477701] swapper/0 isomgr_init(): max_iso_bw=7392000KB<6>[ 0.478070] ardbeg_touch_init init raydium touch [ 0.478239] Raydium - touch platform_id : 8 [ 0.554730] platform tegradc.0: IOVA linear map 0xeec00000(1200000) [ 0.557623] platform tegradc.0: IOVA linear map 0xefe00000(4800000) [ 0.562857] platform tegradc.0: IOVA linear map 0xad012000(1f60000) [ 0.565113] platform tegradc.0: IOVA linear map 0xf6900000(9700000) [ 0.566760] platform tegradc.1: IOVA linear map 0xeec00000(1200000) [ 0.569655] platform tegradc.1: IOVA linear map 0xefe00000(4800000) [ 0.574876] platform tegradc.1: IOVA linear map 0xad012000(1f60000) [ 0.577140] platform tegradc.1: IOVA linear map 0xf6900000(9700000) [ 0.577747] tegra11_soctherem_oc_int_init(): OC interrupts are not enabled [ 0.578181] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.578210] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.578454] mc-err: Started MC error interface! [ 0.589018] bio: create slab at 0 [ 0.590950] reg-fixed-voltage 0.regulator: Consumer c1 does not have device name [ 0.590986] reg-fixed-voltage 0.regulator: Consumer c2 does not have device name [ 0.591015] of_get_named_gpio_flags: can't parse gpios property [ 0.591131] vdd-ac-bat: 8400 mV [ 0.591268] reg-fixed-voltage 1.regulator: Consumer c1 does not have device name [ 0.591300] reg-fixed-voltage 1.regulator: Consumer c2 does not have device name [ 0.591327] of_get_named_gpio_flags: can't parse gpios property [ 0.591428] vdd-3v3-aon: 3300 mV [ 0.591580] reg-fixed-voltage 8.regulator: Consumer c1 does not have device name [ 0.591611] reg-fixed-voltage 8.regulator: Consumer c2 does not have device name [ 0.591640] reg-fixed-voltage 8.regulator: Consumer c3 does not have device name [ 0.591675] reg-fixed-voltage 8.regulator: Consumer c6 does not have device name [ 0.591704] reg-fixed-voltage 8.regulator: Consumer c7 does not have device name [ 0.591732] reg-fixed-voltage 8.regulator: Consumer c8 does not have device name [ 0.591760] reg-fixed-voltage 8.regulator: Consumer c9 does not have device name [ 0.591789] reg-fixed-voltage 8.regulator: Consumer c10 does not have device name [ 0.591818] reg-fixed-voltage 8.regulator: Consumer c11 does not have device name [ 0.591847] reg-fixed-voltage 8.regulator: Consumer c12 does not have device name [ 0.591890] of_get_named_gpio_flags: can't parse gpios property [ 0.591983] reg-3v3-supply: 3300 mV [ 0.593622] vgaarb: loaded [ 0.594270] SCSI subsystem initialized [ 0.594452] libata version 3.00 loaded. [ 0.594636] usbcore: registered new interface driver usbfs [ 0.594700] usbcore: registered new interface driver hub [ 0.594806] usbcore: registered new device driver usb [ 0.595038] of_get_named_gpio_flags exited with status 20 [ 0.595055] of_get_named_gpio_flags exited with status 21 [ 0.595473] of_get_named_gpio_flags exited with status 157 [ 0.595490] of_get_named_gpio_flags exited with status 158 [ 0.595730] of_get_named_gpio_flags exited with status 217 [ 0.595747] of_get_named_gpio_flags exited with status 218 [ 0.595982] of_get_named_gpio_flags exited with status 172 [ 0.595998] of_get_named_gpio_flags exited with status 173 [ 0.596251] of_get_named_gpio_flags exited with status 206 [ 0.596269] of_get_named_gpio_flags exited with status 207 [ 0.597725] as3722 4-0040: AS3722 ID: ID1:ID2:ID3 = 0x0c:0x01:0x15 [ 0.597753] as3722 4-0040: Final OTP version 1V21 [ 0.602650] gpiochip_find_base: found new base at 1016 [ 0.602749] gpiochip_add: registered GPIOs 1016 to 1023 on device: as3722-gpio [ 0.602782] GPIO chip as3722-gpio: created GPIO range 0->7 ==> as3722-pinctrl PIN 0->7 [ 0.602951] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.603007] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.603058] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.603089] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.603118] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name [ 0.603148] as3722-regulator as3722-regulator.0: Consumer c4 does not have device name [ 0.603205] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.603234] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.603286] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name [ 0.603318] as3722-regulator as3722-regulator.0: Consumer c4 does not have device name [ 0.603347] as3722-regulator as3722-regulator.0: Consumer c5 does not have device name [ 0.603376] as3722-regulator as3722-regulator.0: Consumer c6 does not have device name [ 0.603405] as3722-regulator as3722-regulator.0: Consumer c7 does not have device name [ 0.603469] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.603499] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.603528] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name [ 0.603557] as3722-regulator as3722-regulator.0: Consumer c4 does not have device name [ 0.603589] as3722-regulator as3722-regulator.0: Consumer c6 does not have device name [ 0.603621] as3722-regulator as3722-regulator.0: Consumer c8 does not have device name [ 0.603650] as3722-regulator as3722-regulator.0: Consumer c9 does not have device name [ 0.603680] as3722-regulator as3722-regulator.0: Consumer c10 does not have device name [ 0.603709] as3722-regulator as3722-regulator.0: Consumer c11 does not have device name [ 0.603739] as3722-regulator as3722-regulator.0: Consumer c12 does not have device name [ 0.603768] as3722-regulator as3722-regulator.0: Consumer c13 does not have device name [ 0.603797] as3722-regulator as3722-regulator.0: Consumer c14 does not have device name [ 0.603826] as3722-regulator as3722-regulator.0: Consumer c15 does not have device name [ 0.603880] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.603909] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.603961] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.603991] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.604020] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name [ 0.604049] as3722-regulator as3722-regulator.0: Consumer c4 does not have device name [ 0.604078] as3722-regulator as3722-regulator.0: Consumer c5 does not have device name [ 0.604107] as3722-regulator as3722-regulator.0: Consumer c6 does not have device name [ 0.604136] as3722-regulator as3722-regulator.0: Consumer c7 does not have device name [ 0.604165] as3722-regulator as3722-regulator.0: Consumer c8 does not have device name [ 0.604193] as3722-regulator as3722-regulator.0: Consumer c9 does not have device name [ 0.604247] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.604296] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name [ 0.604374] as3722-regulator as3722-regulator.0: Consumer c8 does not have device name [ 0.604404] as3722-regulator as3722-regulator.0: Consumer c9 does not have device name [ 0.604433] as3722-regulator as3722-regulator.0: Consumer c10 does not have device name [ 0.604484] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.604533] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.604562] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.604614] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.604666] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.604720] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.604749] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.604818] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.604848] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.604876] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name [ 0.605788] vdd-cpu: 650 <--> 1300 mV at 1000 mV 3500 mA [ 0.607155] vdd-core: 700 <--> 1350 mV at 1100 mV 3500 mA [ 0.608354] vddio-ddr: at 1350 mV [ 0.608689] as3722-sd3: no parameters [ 0.609259] avdd-pll-pex: 1050 mV [ 0.610456] vdd-1v8: at 1800 mV [ 0.610819] vdd-gpu: applied init 1000000uV constraint [ 0.611694] vdd-gpu: 650 <--> 1200 mV at 1000 mV 3500 mA [ 0.612186] avdd-pll: at 1050 mV at 300 mA [ 0.613446] vdd-cam: 1800 mV at 150 mA [ 0.614107] avdd-dsi-csi: at 1200 mV at 150 mA [ 0.615339] vdd-rtc: 800 mV at 150 mA [ 0.615831] avdd-cam: 2800 mV at 150 mA [ 0.616307] vdd-1v2-cam: 1175 mV at 150 mA [ 0.616673] vddio-sdmmc-2: 1800 <--> 3300 mV at 150 mA [ 0.617170] vdd-1v1-cam: 1275 mV at 150 mA [ 0.618128] avdd-spi: 3300 mV at 150 mA [ 0.618627] vdd-2v7-cam: 2800 mV at 150 mA [ 0.619137] vpp-fuse: 1800 mV at 150 mA [ 0.619773] of_get_named_gpio_flags: can't parse gpios property [ 0.619784] of_get_named_gpio_flags: can't parse gpios property [ 0.620251] Linux video capture interface: v2.00 [ 0.621304] Advanced Linux Sound Architecture Driver Initialized. [ 0.621928] of_get_named_gpio_flags exited with status 108 [ 0.622058] usb0-vbus: 5000 mV [ 0.622245] of_get_named_gpio_flags exited with status 109 [ 0.622361] usb1-usb2-vbus: 5000 mV [ 0.622556] of_get_named_gpio_flags exited with status 86 [ 0.622674] vdd-hdmi: 5000 mV [ 0.622844] of_get_named_gpio_flags exited with status 63 [ 0.622950] avdd-hdmi-pll: 3300 mV [ 0.622998] avdd-hdmi-pll: supplied by avdd-pll-pex [ 0.623180] reg-fixed-sync-voltage 6.regulator: Consumer c1 does not have device name [ 0.623223] of_get_named_gpio_flags exited with status 122 [ 0.623330] vdd-lcd-bl: 3300 mV [ 0.623499] reg-fixed-sync-voltage 7.regulator: Consumer c1 does not have device name [ 0.623560] of_get_named_gpio_flags exited with status 58 [ 0.623677] vdd-lcd-bl-en: 5000 mV [ 0.623842] reg-fixed-sync-voltage 9.regulator: Consumer c3 does not have device name [ 0.623872] of_get_named_gpio_flags: can't parse gpios property [ 0.623960] reg-5v0-supply: 5000 mV [ 0.624125] reg-fixed-sync-voltage a.regulator: Consumer c1 does not have device name [ 0.624158] reg-fixed-sync-voltage a.regulator: Consumer c2 does not have device name [ 0.624188] reg-fixed-sync-voltage a.regulator: Consumer c3 does not have device name [ 0.624235] reg-fixed-sync-voltage a.regulator: Consumer c10 does not have device name [ 0.624265] reg-fixed-sync-voltage a.regulator: Consumer c11 does not have device name [ 0.624294] reg-fixed-sync-voltage a.regulator: Consumer c12 does not have device name [ 0.624323] reg-fixed-sync-voltage a.regulator: Consumer c13 does not have device name [ 0.624352] reg-fixed-sync-voltage a.regulator: Consumer c14 does not have device name [ 0.624381] reg-fixed-sync-voltage a.regulator: Consumer c15 does not have device name [ 0.624436] of_get_named_gpio_flags: can't parse gpios property [ 0.624525] reg-1v8-supply: 1800 mV [ 0.624868] reg-fixed-sync-voltage b.regulator: Consumer c1 does not have device name [ 0.624912] of_get_named_gpio_flags exited with status 138 [ 0.625027] reg-dcdc-1v2: 1200 mV [ 0.625195] reg-fixed-sync-voltage c.regulator: Consumer c7 does not have device name [ 0.625227] reg-fixed-sync-voltage c.regulator: Consumer c8 does not have device name [ 0.625268] of_get_named_gpio_flags exited with status 1018 [ 0.625810] as3722-gpio2-supply: 3300 mV [ 0.626027] reg-fixed-sync-voltage d.regulator: Consumer c1 does not have device name [ 0.626071] of_get_named_gpio_flags exited with status 1020 [ 0.626545] as3722-gpio4-supply: 3300 mV [ 0.626741] of_get_named_gpio_flags exited with status 136 [ 0.626853] sdmmc-en-supply: 3300 mV [ 0.627016] of_get_named_gpio_flags exited with status 138 [ 0.627106] vdd-cdc-1v2-aud: 1200 mV [ 0.627260] reg-fixed-sync-voltage 10.regulator: Consumer c1 does not have device name [ 0.627292] reg-fixed-sync-voltage 10.regulator: Consumer c2 does not have device name [ 0.627322] reg-fixed-sync-voltage 10.regulator: Consumer c3 does not have device name [ 0.627350] of_get_named_gpio_flags: can't parse gpios property [ 0.627448] reg-aon-1v8: 1800 mV [ 0.627634] reg-fixed-sync-voltage 11.regulator: Consumer c1 does not have device name [ 0.627665] of_get_named_gpio_flags: can't parse gpios property [ 0.627754] reg-aon-1v2: 1200 mV [ 0.630776] as3722-adc-extcon as3722-adc-extcon.2: USB-Host is disconnected [ 0.634275] tegra: started io power detection dynamic control [ 0.634298] tegra: NO_IO_POWER setting 0x0 [ 0.634317] Switching to clocksource arch_sys_counter [ 0.656042] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.656226] nvmap_page_pool_init: Total MB RAM: 1710 [ 0.656247] nvmap_page_pool_init: nvmap page pool size: 54720 pages (213 MB) [ 0.746726] nvmap_page_pool_init: highmem=25600, pool_size=54720,totalram=437966, freeram=409241, totalhigh=259072, freehigh=233402 [ 0.747480] iram: dma coherent mem declare 0x40001000,258048 [ 0.748256] misc nvmap: created heap iram base 0x40001000 size (252KiB) [ 0.748365] vpr: dma coherent mem declare 0xf6900000,158334976 [ 0.750913] misc nvmap: created heap vpr base 0xf6900000 size (154624KiB) [ 0.751057] nvmap:inner cache maint threshold=2097152 [ 0.760856] Wake39 for irq=52 [ 0.760950] tegra-otg tegra-otg: otg transceiver registered [ 0.761297] NET: Registered protocol family 2 [ 0.761983] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.762184] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.762403] TCP: Hash tables configured (established 8192 bind 8192) [ 0.762463] TCP: reno registered [ 0.762486] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.762539] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.762816] NET: Registered protocol family 1 [ 0.763208] RPC: Registered named UNIX socket transport module. [ 0.763231] RPC: Registered udp transport module. [ 0.763248] RPC: Registered tcp transport module. [ 0.763265] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.763288] PCI: CLS 0 bytes, default 64 [ 0.763570] tegra-fuse tegra-fuse: Fuse driver initialized succesfully [ 0.768921] host1x host1x: initialized [ 0.770258] CPU PMU: probing PMU on CPU 0 [ 0.770291] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available [ 0.770933] tegra_throttle : init passed [ 0.771041] Tegra cpuquiet initialized: disabled [ 0.771178] cpu-tegra: init EDP limit: 2320 MHz [ 0.772137] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm [ 0.772465] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm [ 0.772689] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type MEM-therm [ 0.772906] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.774364] bounce pool size: 64 pages [ 0.775810] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.776110] NTFS driver 2.1.30 [Flags: R/O]. [ 0.776256] fuse init (API version 7.22) [ 0.776499] msgmni has been set to 1397 [ 0.777918] io scheduler noop registered (default) [ 0.778227] of_get_named_gpio_flags: can't parse gpios property [ 0.778238] of_get_named_gpio_flags: can't parse gpios property [ 0.778247] of_get_named_gpio_flags: can't parse gpios property [ 0.979143] PCIE: port 0: link down, retrying [ 1.179190] PCIE: port 0: link down, retrying [ 1.379234] PCIE: port 0: link down, retrying [ 1.379254] PCIE: port 0: link down, ignoring [ 1.384428] PCI host bridge to bus 0000:00 [ 1.384454] pci_bus 0000:00: root bus resource [mem 0x32100000-0x3fffffff] [ 1.384480] pci_bus 0000:00: root bus resource [mem 0x12100000-0x320fffff pref] [ 1.384510] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] [ 1.384534] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 1.384595] pci 0000:00:00.0: [10de:0e13] type 01 class 0x060400 [ 1.384691] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.384913] PCI: bus0: Fast back to back transfers disabled [ 1.384939] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.385138] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 1.385172] pci 0000:01:00.0: reg 10: [io 0x0000-0x00ff] [ 1.385220] pci 0000:01:00.0: reg 18: [mem 0x00000000-0x00000fff 64bit] [ 1.385252] pci 0000:01:00.0: reg 20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.385355] pci 0000:01:00.0: supports D1 D2 [ 1.385366] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.387438] PCI: bus1: Fast back to back transfers disabled [ 1.387466] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.387483] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01 [ 1.387779] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [ 1.387807] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 1.387834] pcie_pme 0000:00:00.0:pcie01: service driver pcie_pme loaded [ 1.387949] aer 0000:00:00.0:pcie02: service driver aer loaded [ 1.388045] pcieport 0000:00:00.0: BAR 8: assigned [mem 0x32100000-0x321fffff] [ 1.388077] pcieport 0000:00:00.0: BAR 9: assigned [mem 0x12100000-0x121fffff 64bit pref] [ 1.388107] pcieport 0000:00:00.0: BAR 7: assigned [io 0x1000-0x1fff] [ 1.388137] pci 0000:01:00.0: BAR 4: assigned [mem 0x12100000-0x12103fff 64bit pref] [ 1.388181] pci 0000:01:00.0: BAR 2: assigned [mem 0x32100000-0x32100fff 64bit] [ 1.388223] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 1.388251] pcieport 0000:00:00.0: PCI bridge to [bus 01] [ 1.388273] pcieport 0000:00:00.0: bridge window [io 0x1000-0x1fff] [ 1.388299] pcieport 0000:00:00.0: bridge window [mem 0x32100000-0x321fffff] [ 1.388328] pcieport 0000:00:00.0: bridge window [mem 0x12100000-0x121fffff 64bit pref] [ 1.388367] PCIE: No Link speed change happened [ 1.388950] pwm-backlight pwm-backlight: unable to request PWM, trying legacy API [ 1.389055] sysedp_create_consumer: unable to create pwm-backlight, no consumer_data for pwm-backlight found [ 1.389950] tsec tsec: initialized [ 1.391462] isp isp.0: initialized [ 1.392452] isp isp.1: initialized [ 1.394018] falcon vic03.0: initialized [ 1.395207] falcon msenc: initialized [ 1.396027] tegradc tegradc.0: DSI: HS clock rate is 464500 [ 1.397331] p,wuxga-10-1 panel dt support not available [ 1.677305] tegradc tegradc.0: nominal-pclk:154700000 parent:154500000 div:1.0 pclk:154500000 153153000~168623000 [ 1.765562] tegradc tegradc.0: DSI pad calibration done [ 1.772700] tegradc tegradc.0: probed [ 1.773192] tegradc tegradc.0: fb registered [ 1.773215] tegradc tegradc.0: nominal-pclk:154679000 parent:463500000 div:3.0 pclk:154500000 153132210~168600110 [ 1.779075] gpio wake4 for gpio=111 [ 1.806990] tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000 [ 1.808297] tegradc tegradc.1: probed [ 1.829581] Console: switching to colour frame buffer device 240x67 [ 1.848328] tegradc tegradc.1: fb registered [ 1.848451] hdmi_state_machine_worker (tid ebb00580): state 7 (Takeover from bootloader), hpd 1, pending_hpd_evt 1 [ 1.848629] hdmi_state_machine_set_state_l: switching from state 7 (Takeover from bootloader) to state 1 (Check Plug) [ 1.851904] tegra-apbdma tegra-apbdma: Tegra20 APB DMA driver register 32 channels [ 1.852731] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.854112] serial8250.0: ttyS0 at MMIO 0x70006300 (irq = 122) is a Tegra [ 1.889905] hdmi_state_machine_worker (tid ebb00580): state 1 (Check Plug), hpd 1, pending_hpd_evt 0 [ 1.889911] hdmi_state_machine_set_state_l: switching from state 1 (Check Plug) to state 2 (Check EDID) [ 1.970868] hdmi_state_machine_worker (tid ebb00580): state 2 (Check EDID), hpd 1, pending_hpd_evt 0 [ 2.025366] panel size 51 by 29 [ 4.183822] console [ttyS0] enabled [ 4.183982] tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000 [ 4.184447] serial-tegra.0: ttyTHS0 at MMIO 0x70006000 (irq = 68) is a SERIAL_TEGRA [ 4.184730] serial-tegra.1: ttyTHS1 at MMIO 0x70006040 (irq = 69) is a SERIAL_TEGRA [ 4.185012] serial-tegra.2: ttyTHS2 at MMIO 0x70006200 (irq = 78) is a SERIAL_TEGRA [ 4.190753] loop: module loaded [ 4.191071] nct1008_nct72 0-004c: success in enabling rail vdd_nct72 [ 4.194869] gpio wake35 for gpio=70 [ 4.194938] nct1008_nct72 0-004c: nct1008_probe: initialized [ 4.195562] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ 4.196686] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 4.198627] tegra_profiler: Branch: Dev [ 4.198630] tegra_profiler: Version: 1.77 [ 4.198634] tegra_profiler: Samples version: 30 [ 4.198637] tegra_profiler: IO version: 13 [ 4.198643] armv7_pmu: arch: Cortex A15, type: 4, ver: 0 [ 4.198647] tegra_profiler: PMU: amount of events: 10 [ 4.198650] tegra_profiler: PMU event: cpu-cycles [ 4.198653] tegra_profiler: PMU event: instructions [ 4.198656] tegra_profiler: PMU event: branch_instruction [ 4.198659] tegra_profiler: PMU event: branch_misses [ 4.198661] tegra_profiler: PMU event: bus-cycles [ 4.198664] tegra_profiler: PMU event: l1_d_read [ 4.198667] tegra_profiler: PMU event: l1_d_write [ 4.198669] tegra_profiler: PMU event: l1_i [ 4.198672] tegra_profiler: PMU event: l2_d_read [ 4.198674] tegra_profiler: PMU event: l2_d_write [ 4.198677] tegra_profiler: PL310 not found [ 4.198711] tegra_profiler: power_clk: init [ 4.198841] tegra_profiler: auth: init [ 4.199206] GPS: mt3332_gps_mod_init: platform_driver_register ret = 0 [ 4.199918] tegra-sata tegra-sata.0: version 1.0 [ 4.199928] of_get_named_gpio_flags: can't parse gpios property [ 4.200645] tegra-sata tegra-sata.0: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl TEGRA-SATA mode [ 4.200657] tegra-sata tegra-sata.0: flags: 64bit ncq sntf pm led pio slum part sadm sds apst [ 4.201878] scsi0 : tegra-sata [ 4.202268] scsi1 : tegra-sata [ 4.202516] ata1: SATA max UDMA/133 irq 55 [ 4.202520] ata2: DUMMY [ 4.204556] tun: Universal TUN/TAP device driver, 1.6 [ 4.204561] tun: (C) 1999-2004 Max Krasnyansky [ 4.204808] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 4.207230] r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xf0000000, 00:04:4b:21:2f:6a, XID 0c000800 IRQ 641 [ 4.207238] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 4.207437] usbcore: registered new interface driver asix [ 4.207484] usbcore: registered new interface driver ax88179_178a [ 4.207523] usbcore: registered new interface driver cdc_ether [ 4.207583] usbcore: registered new interface driver smsc95xx [ 4.207621] usbcore: registered new interface driver cdc_subset [ 4.207693] usbcore: registered new interface driver cdc_ncm [ 4.207710] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.207932] tegra USB phy - inst[1] platform info: [ 4.207936] port_otg: no [ 4.207938] has_hostpc: yes [ 4.207941] phy_interface: USB_PHY_INTF_UTMI [ 4.207944] op_mode: TEGRA_USB_OPMODE_HOST [ 4.207947] qc2_voltage: 0 [ 4.207950] vbus_gpio: -1 [ 4.207953] hot_plug: disabled [ 4.207955] remote_wakeup: enabled [ 4.208316] tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000 [ 4.209515] tegra-ehci tegra-ehci.1: Tegra EHCI Host Controller [ 4.209548] tegra-ehci tegra-ehci.1: new USB bus registered, assigned bus number 1 [ 4.209645] Wake40 for irq=53 [ 4.209648] Wake42 for irq=53 [ 4.209673] tegra-ehci tegra-ehci.1: irq 53, io mem 0x7d004000 [ 4.215417] tegra-ehci tegra-ehci.1: USB 2.0 started, EHCI 1.10 [ 4.215510] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.215518] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.215525] usb usb1: Product: Tegra EHCI Host Controller [ 4.215532] usb usb1: Manufacturer: Linux 3.10.40-g8c4516e ehci_hcd [ 4.215538] usb usb1: SerialNumber: tegra-ehci.1 [ 4.216065] hub 1-0:1.0: USB hub found [ 4.216085] hub 1-0:1.0: 1 port detected [ 4.216493] tegra USB phy - inst[2] platform info: [ 4.216497] port_otg: no [ 4.216499] has_hostpc: yes [ 4.216502] phy_interface: USB_PHY_INTF_UTMI [ 4.216505] op_mode: TEGRA_USB_OPMODE_HOST [ 4.216508] qc2_voltage: 0 [ 4.216511] vbus_gpio: -1 [ 4.216513] hot_plug: disabled [ 4.216516] remote_wakeup: enabled [ 4.217981] tegra-ehci tegra-ehci.2: Tegra EHCI Host Controller [ 4.218002] tegra-ehci tegra-ehci.2: new USB bus registered, assigned bus number 2 [ 4.218090] Wake41 for irq=129 [ 4.218094] Wake43 for irq=129 [ 4.218115] tegra-ehci tegra-ehci.2: irq 129, io mem 0x7d008000 [ 4.223416] tegra-ehci tegra-ehci.2: USB 2.0 started, EHCI 1.10 [ 4.223498] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.223506] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.223512] usb usb2: Product: Tegra EHCI Host Controller [ 4.223518] usb usb2: Manufacturer: Linux 3.10.40-g8c4516e ehci_hcd [ 4.223524] usb usb2: SerialNumber: tegra-ehci.2 [ 4.224013] hub 2-0:1.0: USB hub found [ 4.224032] hub 2-0:1.0: 1 port detected [ 4.224438] ehci-pci: EHCI PCI platform driver [ 4.224712] tegra_xusb_read_usb_calib: usb_calib0 = 0x0284838a [ 4.224950] usbcore: registered new interface driver usb-storage [ 4.225051] usbcore: registered new interface driver usbserial [ 4.225088] usbcore: registered new interface driver option [ 4.225120] usbserial: USB Serial support registered for GSM modem (1-port) [ 4.225223] usbcore: registered new interface driver pl2303 [ 4.225253] usbserial: USB Serial support registered for pl2303 [ 4.225265] Nvidia Tegra High-Speed USB Device Controller driver (Apr 30, 2012) [ 4.225467] tegra USB phy - inst[0] platform info: [ 4.225470] port_otg: yes [ 4.225472] has_hostpc: yes [ 4.225475] phy_interface: USB_PHY_INTF_UTMI [ 4.225478] op_mode: TEGRA_USB_OPMODE_DEVICE [ 4.225480] qc2_voltage: 0 [ 4.225483] vbus_pmu_irq: 0 [ 4.225485] vbus_gpio: -1 [ 4.225488] charging: enabled [ 4.225490] remote_wakeup: disabled [ 4.228284] tegra-udc tegra-udc.0: usb_bat_chg regulator not registered: USB charging will not be enabled [ 4.265046] as3722-rtc as3722-rtc.1: rtc core: registered as3722 as rtc0 [ 4.265054] as3722-rtc as3722-rtc.1: RTC interrupt 449 [ 4.321441] i2c /dev entries driver [ 4.322551] virtual_init [ 4.324411] nvavp nvavp: allocated IOVA at 8ff00000 for AVP os [ 4.325151] tegra_dtv_probe: probing dtv. [ 4.325503] setup_stream: bufsize = 4096, bufnum = 4 [ 4.325503] ar0832_init: ++ [ 4.325876] i2c-core: driver [max77387] using legacy suspend method [ 4.325879] i2c-core: driver [max77387] using legacy resume method [ 4.325929] i2c-core: driver [as364x] using legacy suspend method [ 4.325931] i2c-core: driver [as364x] using legacy resume method [ 4.326075] [IMX135] sensor driver loading [ 4.326121] [IMX179] sensor driver loading [ 4.326167] [imx132] sensor driver loading [ 4.326213] [ar0261] sensor driver loading [ 4.326545] usbcore: registered new interface driver uvcvideo [ 4.326548] USB Video Class driver (1.1.1) [ 4.327451] zram: Created 1 device(s) ... [ 4.328659] sdhci: Secure Digital Host Controller Interface driver [ 4.328661] sdhci: Copyright(c) Pierre Ossman [ 4.328664] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.329038] sdhci-tegra sdhci-tegra.3: vddio_sd_slot regulator not found: -517. Assuming vddio_sd_slot is not required. [ 4.329193] sdhci-tegra sdhci-tegra.3: Speedo value 2260 [ 4.329202] sdhci-tegra sdhci-tegra.3: Tuning constraints: nom_mv 1150, boot_mv 1150, min_or_mv 1100 [ 4.378422] otg state changed: SUSPEND --> PERIPHERAL [ 4.507443] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.527441] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.592721] ata1.00: ATA-8: WDC WD7500BPKX-22HPJT0, 01.01A01, max UDMA/133 [ 4.592729] ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 4.626461] ata1.00: configured for UDMA/133 [ 4.626506] usb 2-1: New USB device found, idVendor=2109, idProduct=0811 [ 4.626515] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4.626522] usb 2-1: Product: USB2.0 Hub [ 4.635175] hub 2-1:1.0: USB hub found [ 4.635364] scsi 0:0:0:0: Direct-Access ATA WDC WD7500BPKX-2 01.0 PQ: 0 ANSI: 5 [ 4.636041] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 4.636048] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 4.636369] sd 0:0:0:0: [sda] Write Protect is off [ 4.636397] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.636533] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.636771] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.643352] hub 2-1:1.0: 4 ports detected [ 4.696017] sda: sda1 sda2 sda3 sda4 [ 4.697622] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.022952] usb 2-1.1: new high-speed USB device number 3 using tegra-ehci [ 5.095801] usb 2-1.1: New USB device found, idVendor=1a40, idProduct=0201 [ 5.095809] usb 2-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 5.095816] usb 2-1.1: Product: USB 2.0 Hub [MTT] [ 5.104033] hub 2-1.1:1.0: USB hub found [ 5.111966] hub 2-1.1:1.0: 7 ports detected [ 5.610904] usb 2-1.1.3: new high-speed USB device number 4 using tegra-ehci [ 5.648489] handle_check_edid_l: audio_switch 1 [ 5.657550] Display connected, hpd_switch 1 [ 5.666229] handle_check_edid_l: setting audio and infoframes [ 5.676530] hdmi_state_machine_set_state_l: switching from state 2 (Check EDID) to state 4 (Enabled) [ 5.690770] mmc0: no vqmmc regulator found [ 5.697058] usb 2-1.1.3: New USB device found, idVendor=0b95, idProduct=7720 [ 5.697067] usb 2-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.697073] usb 2-1.1.3: Product: AX88x72A [ 5.697080] usb 2-1.1.3: Manufacturer: ASIX Elec. Corp. [ 5.697086] usb 2-1.1.3: SerialNumber: 0C6A24 [ 5.750306] mmc0: no vmmc regulator found [ 5.758913] mmc0: Invalid maximum block size, assuming 512 bytes [ 5.769600] sysedp_create_consumer: unable to create sdhci-tegra.3, no consumer_data for sdhci-tegra.3 found [ 5.803421] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA [ 5.821073] sdhci-tegra sdhci-tegra.2: Speedo value 2260 [ 5.831269] sdhci-tegra sdhci-tegra.2: Tuning constraints: nom_mv 1150, boot_mv 1150, min_or_mv 1100 [ 5.845770] mmc1: no vqmmc regulator found [ 5.854816] mmc1: no vmmc regulator found [ 5.863685] mmc1: Invalid maximum block size, assuming 512 bytes [ 5.874625] sysedp_create_consumer: unable to create sdhci-tegra.2, no consumer_data for sdhci-tegra.2 found [ 5.908419] mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA [ 5.925666] mmc0: BKOPS_EN bit is not set [ 5.934815] gpio wake56 for gpio=170 [ 5.939930] sdhci-tegra sdhci-tegra.3: Found T2T coeffs data [ 5.939938] sdhci-tegra sdhci-tegra.3: 200MHz tap hole coeffs found [ 5.968771] tegra-se tegra12-se: tegra_se_probe: complete [ 5.981645] usbcore: registered new interface driver usbhid [ 5.992256] usbhid: USB HID core driver [ 6.001523] tegra-hier-ictlr tegra-hier-ictlr: probed [ 6.057001] asix 2-1.1.3:1.0 eth1: register 'asix' at usb-tegra-ehci.2-1.1.3, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0c:6a:24 [ 6.135640] usb 2-1.1.6: new low-speed USB device number 5 using tegra-ehci [ 6.166772] usb 2-1.1.6: New USB device found, idVendor=046d, idProduct=c03e [ 6.179225] usb 2-1.1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.192101] usb 2-1.1.6: Product: USB-PS/2 Optical Mouse [ 6.202814] usb 2-1.1.6: Manufacturer: Logitech [ 6.216843] input: Logitech USB-PS/2 Optical Mouse as /devices/platform/tegra-ehci.2/usb2/2-1/2-1.1/2-1.1.6/2-1.1.6:1.0/input/input0 [ 6.234521] hid-generic 0003:046D:C03E.0001: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-tegra-ehci.2-1.1.6/input0 [ 6.314639] usb 2-1.1.7: new low-speed USB device number 6 using tegra-ehci [ 6.359905] usb 2-1.1.7: New USB device found, idVendor=04d9, idProduct=1503 [ 6.372558] usb 2-1.1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.385619] usb 2-1.1.7: Product: USB Keyboard [ 6.395550] usb 2-1.1.7: Manufacturer: [ 6.416400] input: USB Keyboard as /devices/platform/tegra-ehci.2/usb2/2-1/2-1.1/2-1.1.7/2-1.1.7:1.0/input/input1 [ 6.432600] hid-generic 0003:04D9:1503.0002: input: USB HID v1.10 Keyboard [ USB Keyboard] on usb-tegra-ehci.2-1.1.7/input0 [ 6.466824] input: USB Keyboard as /devices/platform/tegra-ehci.2/usb2/2-1/2-1.1/2-1.1.7/2-1.1.7:1.1/input/input2 [ 6.483133] hid-generic 0003:04D9:1503.0003: input: USB HID v1.10 Device [ USB Keyboard] on usb-tegra-ehci.2-1.1.7/input1 [ 6.491486] **********Auto tuning windows************* [ 6.491489] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE [ 6.491495] win[0]: 0(0) - 75(1) [ 6.491499] win[1]: 81(0) - 156(1) [ 6.491503] win[2]: 163(0) - 238(1) [ 6.491507] win[3]: 244(0) - 255(1) [ 6.491510] *************************************** [ 6.491536] ********tuning windows after inserting holes***** [ 6.491538] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE [ 6.491543] win[0]:-81(0) - -1(1) [ 6.491547] win[1]:0(0) - 0(1) [ 6.491551] win[2]:1(0) - 42(2) [ 6.491555] win[3]:44(2) - 75(1) [ 6.491559] win[4]:81(0) - 123(2) [ 6.491562] win[5]:125(2) - 156(1) [ 6.491566] win[6]:163(0) - 204(2) [ 6.491569] win[7]:206(2) - 238(1) [ 6.491573] win[8]:244(0) - 255(1) [ 6.491575] *********************************************** [ 6.491580] **********Tuning values********* [ 6.491582] **estimated values** [ 6.491587] T2T_Vmax 57, T2T_Vmin 79, 1'st_hole_Vmax 47, UI_Vmax 87 [ 6.491590] **Calculated values** [ 6.491593] T2T_Vmax 61, 1'st_hole_Vmax 43, UI_Vmax 81 [ 6.491597] T2T_Vmin 61, 1'st_hole_Vmin 43, UI_Vmin 81 [ 6.491600] *********************************** [ 6.491607] ***********final tuning windows********** [ 6.491611] win[0]: -65 - -17 [ 6.491614] win[1]: 16 - -16 [ 6.491617] win[2]: 17 - 33 [ 6.491620] win[3]: 54 - 59 [ 6.491624] win[4]: 97 - 109 [ 6.491627] win[5]: 140 - 140 [ 6.491629] win[6]: 179 - 184 [ 6.491632] win[7]: 227 - 222 [ 6.491635] win[8]: 255 - 239 [ 6.491637] ******************************** [ 6.491641] best tap win - (17-33), best tap value 25 [ 6.491651] sdhci-tegra sdhci-tegra.3: sdhci_tegra_verify_best_tap: tuning freq 200000000hz, best tap 25 [ 6.494174] mmc0: new HS200 MMC card at address 0001 [ 6.494430] mmcblk mmc0:0001: Card claimed for testing. [ 6.494638] mmcblk0: mmc0:0001 SEM16G 14.6 GiB [ 6.494800] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB [ 6.898154] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 [ 7.000548] usbcore: registered new interface driver snd-usb-audio [ 7.011775] MAX98090 driver built on Oct 7 2014 at 19:16:46 [ 7.022637] tegra_offload_platform probe successfull. [ 7.031124] succefully registered offload opstegra30_avp_audio_platform_probe successful. [ 7.306028] rt5639 0-001c: read 0xfd=0x6 [ 7.333141] rt5639 0-001c: ASoC: mux INR Mux has no paths [ 7.343046] rt5639 0-001c: ASoC: mux INL Mux has no paths [ 7.353710] gpio wake49 for gpio=143 [ 7.361707] rt5639 0-001c: rt5639_headset_detect jack_type = 1 [ 7.372206] tegra-snd-rt5639 tegra-snd-rt5639.0: rt5639-aif1 <-> tegra30-i2s.1 mapping ok [ 7.385537] tegra-snd-rt5639 tegra-snd-rt5639.0: dit-hifi <-> tegra30-spdif mapping ok [ 7.398726] tegra-snd-rt5639 tegra-snd-rt5639.0: dit-hifi <-> tegra30-i2s.3 mapping ok [ 7.411754] tegra-snd-rt5639 tegra-snd-rt5639.0: rt5639-aif1 <-> dit-hifi mapping ok [ 7.424553] tegra-snd-rt5639 tegra-snd-rt5639.0: dit-hifi <-> dit-hifi mapping ok [ 7.436839] tegra-snd-rt5639 tegra-snd-rt5639.0: Allocating for stream playback [ 7.448265] tegra-snd-rt5639 tegra-snd-rt5639.0: Allocating for stream capture [ 7.459526] tegra-snd-rt5639 tegra-snd-rt5639.0: snd-soc-dummy-dai <-> tegra-offload-pcm mapping ok [ 7.473234] compress asoc: snd-soc-dummy-dai <-> tegra-offload-compr mapping ok [ 7.485224] tegra-snd-rt5639 tegra-snd-rt5639.0: Allocating for stream playback [ 7.496637] tegra-snd-rt5639 tegra-snd-rt5639.0: Allocating for stream capture [ 7.507810] tegra-snd-rt5639 tegra-snd-rt5639.0: snd-soc-dummy-dai <-> tegra-offload-pcm mapping ok [ 7.521339] tegra-snd-rt5639 tegra-snd-rt5639.0: rt5639-aif1 <-> tegra30-i2s.1 mapping ok [ 7.537136] input: tegra-rt5639 Headphone Jack as /devices/platform/tegra-snd-rt5639.0/sound/card1/input3 [ 7.551531] sysedp_create_consumer: unable to create speaker, no consumer_data for speaker found [ 7.561031] oprofile: using timer interrupt. [ 7.573039] GACT probability NOT on [ 7.580317] Mirror/redirect action on [ 7.587774] u32 classifier [ 7.594315] Actions configured [ 7.601519] Netfilter messages via NETLINK v0.30. [ 7.610063] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 7.620466] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 [ 7.631311] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. [ 7.641425] xt_time: kernel timezone is -0000 [ 7.649996] ip_tables: (C) 2000-2006 Netfilter Core Team [ 7.659479] arp_tables: (C) 2002 David S. Miller [ 7.668194] TCP: cubic registered [ 7.675685] NET: Registered protocol family 10 [ 7.685173] mip6: Mobile IPv6 [ 7.692312] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 7.702025] sit: IPv6 over IPv4 tunneling driver [ 7.711796] NET: Registered protocol family 17 [ 7.720486] NET: Registered protocol family 15 [ 7.729181] NET: Registered protocol family 35 [ 7.737911] NET: Registered protocol family 37 [ 7.746436] NET: Registered protocol family 41 [ 7.756291] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 7.792027] Registering SWP/SWPB emulation handler [ 7.800945] last reset is due to power on reset [ 7.800945] [ 7.822413] Disabling clocks left on by bootloader: [ 7.831426] audio_2x [ 7.838038] audio [ 7.844443] audio4 [ 7.850898] audio3 [ 7.857307] audio2 [ 7.863713] audio1 [ 7.870138] audio0 [ 7.876617] hdmi_audio [ 7.883348] entropy [ 7.889814] dsi2-fixed [ 7.896418] dsi1-fixed [ 7.902923] nor [ 7.908767] trace [ 7.914787] sdmmc4_ddr [ 7.921179] sdmmc3_ddr [ 7.927548] cclk_lp [ 7.933560] pll_x_out0 [ 7.939816] pll_m_out1 [ 7.946118] tegra_dvfs: vdd_cpu connected to regulator [ 7.954881] tegra_dvfs: vdd_core connected to regulator [ 7.963665] tegra_dvfs: vdd_gpu connected to regulator [ 7.973201] tegra_dvfs: registered vdd_cpu simon notifier [ 7.982672] cpu_cold cooling device is registered [ 7.990916] Tegra CPU DFLL is initialized with use_dfll = 1 [ 7.991016] cpu_hot cooling device is registered [ 8.008135] CPU rate: 696 MHz [ 8.291876] tegra dvfs: tegra sysfs cap interface is initialized [ 8.301441] tegra dvfs: tegra sysfs gpu & emc interface is initialized [ 8.311406] tegra dvfs: registered vdd_gpu simon notifier [ 8.320576] tegra_actmon.emc: Completed initialization (0) [ 8.329744] tegra_actmon.avp: Completed initialization (0) [ 8.338830] tegra_mon.cpu_emc: Completed initialization (0) [ 8.350781] reg-aon-1v2: incomplete constraints, leaving on [ 8.359784] reg-aon-1v8: incomplete constraints, leaving on [ 8.368701] sdmmc-en-supply: incomplete constraints, leaving on [ 8.377976] reg-dcdc-1v2: incomplete constraints, leaving on [ 8.387028] reg-5v0-supply: incomplete constraints, leaving on [ 8.396423] usb0-vbus: incomplete constraints, leaving on [ 8.405117] vpp-fuse: incomplete constraints, leaving on [ 8.413663] vdd-2v7-cam: incomplete constraints, leaving on [ 8.422428] avdd-spi: incomplete constraints, leaving on [ 8.430950] vdd-1v1-cam: incomplete constraints, leaving on [ 8.439758] vddio-sdmmc-2: incomplete constraints, leaving on [ 8.448770] vdd-1v2-cam: incomplete constraints, leaving on [ 8.457638] avdd-cam: incomplete constraints, leaving on [ 8.466248] vdd-cam: incomplete constraints, leaving on [ 8.474757] as3722-sd3: incomplete constraints, leaving on [ 8.483513] vdd-3v3-aon: incomplete constraints, leaving on [ 8.492350] vdd-ac-bat: incomplete constraints, leaving on [ 8.501093] regulator-dummy: incomplete constraints, leaving on [ 8.511024] of_get_named_gpio_flags exited with status 128 [ 8.511078] gpio wake51 for gpio=128 [ 8.518145] input: gpio-keys.4 as /devices/platform/gpio-keys.4/input/input4 [ 8.529239] as3722-rtc as3722-rtc.1: setting system clock to 2014-11-28 08:35:59 UTC (1417163759) [ 8.542042] ALSA device list: [ 8.548455] #0: HDA NVIDIA Tegra at 0x70038000 irq 113 [ 8.557297] #1: tegra-rt5639 [ 8.564961] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 8.577265] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 8.602612] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 8.614413] VFS: Mounted root (ext4 filesystem) on device 179:1. [ 8.627079] devtmpfs: mounted [ 8.634154] Freeing unused kernel memory: 504K (c0b2e000 - c0bac000) [ 8.900349] init: plymouth-upstart-bridge main process (118) terminated with status 1 [ 8.912425] init: plymouth-upstart-bridge main process ended, respawning [ 8.963109] init: plymouth-upstart-bridge main process (128) terminated with status 1 [ 8.974922] init: plymouth-upstart-bridge main process ended, respawning [ 8.989848] init: ureadahead main process (121) terminated with status 5 [ 9.028969] init: plymouth-upstart-bridge main process (132) terminated with status 1 [ 9.040844] init: plymouth-upstart-bridge main process ended, respawning [ 9.896771] systemd-udevd[250]: starting version 204 [ 10.066605] Tegra cpuquiet clusterswitch enabled [ 10.115922] vi vi.0: vi_probe: ++ [ 10.122841] vi vi.0: initialized [ 10.123812] vi vi.1: vi_probe: ++ [ 10.139980] vi vi.1: initialized [ 10.621462] tegra_simon_cpu_grading_cb: graded cpu: v = 800, t = 38000, grade = 0 [ 11.652744] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 11.701008] device-mapper: uevent: version 1.0.3 [ 11.702054] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com [ 11.900253] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 12.322112] init: failsafe main process (533) killed by TERM signal [ 12.676420] Bluetooth: Core ver 2.16 [ 12.676597] NET: Registered protocol family 31 [ 12.676606] Bluetooth: HCI device and connection manager initialized [ 12.676628] Bluetooth: HCI socket layer initialized [ 12.676640] Bluetooth: L2CAP socket layer initialized [ 12.676666] Bluetooth: SCO socket layer initialized [ 12.696418] Bluetooth: RFCOMM socket layer initialized [ 12.696432] Bluetooth: RFCOMM ver 1.11 [ 12.704636] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.704676] Bluetooth: BNEP socket layer initialized [ 13.015562] r8169 0000:01:00.0 eth0: link down [ 13.015653] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.018040] r8169 0000:01:00.0 eth0: link down [ 13.089430] NOHZ: local_softirq_pending 100 [ 13.497699] init: plymouth-upstart-bridge main process ended, respawning [ 13.836318] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 14.026670] vgaarb: this pci device is not a vga device [ 14.058093] tegra_simon_gpu_grading_cb: graded gpu: v = 800, t = 35500, grade = 0 [ 14.061525] gk20a gk20a.0: firmware: direct-loading firmware tegra12x/gpmu_ucode.bin [ 14.065226] gk20a gk20a.0: firmware: direct-loading firmware tegra12x/NETB_img.bin [ 14.067040] gk20a gk20a.0: firmware: direct-loading firmware tegra12x/fecs.bin [ 14.069728] gk20a gk20a.0: firmware: direct-loading firmware tegra12x/gpccs.bin [ 14.123654] init: plymouth-stop pre-start process (933) terminated with status 1 [ 14.220605] vgaarb: this pci device is not a vga device [ 14.250606] tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000 [ 14.250717] tegra_dc_hdmi_enable: HDMI clock already configured to target frequency, skipping clk setup. [ 15.640106] r8169 0000:01:00.0 eth0: link up [ 15.640236] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 15.875378] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 15.881071] asix 2-1.1.3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ 16.642534] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead. [ 77.217675] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 251.740106] ata1.00: exception Emask 0x0 SAct 0xe00 SErr 0x19d0000 action 0x6 frozen [ 251.756311] ata1: SError: { PHYRdyChg CommWake 10B8B Dispar LinkSeq TrStaTrns } [ 251.768045] ata1.00: failed command: READ FPDMA QUEUED [ 251.777264] ata1.00: cmd 60/00:48:00:b9:cf/02:00:0e:00:00/40 tag 9 ncq 262144 in [ 251.777264] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 251.792455] ata1.00: status: { DRDY } [ 251.796498] ata1.00: failed command: READ FPDMA QUEUED [ 251.801835] ata1.00: cmd 60/d8:50:00:bb:cf/00:00:0e:00:00/40 tag 10 ncq 110592 in [ 251.801835] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 251.816980] ata1.00: status: { DRDY } [ 251.820814] ata1.00: failed command: WRITE FPDMA QUEUED [ 251.826177] ata1.00: cmd 61/28:58:70:90:8d/01:00:0e:00:00/40 tag 11 ncq 151552 out [ 251.826177] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 251.841793] ata1.00: status: { DRDY } [ 251.845747] ata1: hard resetting link [ 252.151875] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 252.162087] ata1.00: configured for UDMA/133 [ 252.162932] ata1.00: device reported invalid CHS sector 0 [ 252.164202] ata1.00: device reported invalid CHS sector 0 [ 252.164349] ata1.00: device reported invalid CHS sector 0 [ 252.164666] ata1: EH complete [ 313.089210] ata1.00: exception Emask 0x0 SAct 0x7ff800 SErr 0x19d0000 action 0x6 frozen [ 313.110814] ata1: SError: { PHYRdyChg CommWake 10B8B Dispar LinkSeq TrStaTrns } [ 313.121036] ata1.00: failed command: READ FPDMA QUEUED [ 313.131003] ata1.00: cmd 60/08:58:18:7b:ca/00:00:0e:00:00/40 tag 11 ncq 4096 in [ 313.131003] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 313.146903] ata1.00: status: { DRDY } [ 313.150829] ata1.00: failed command: WRITE FPDMA QUEUED [ 313.156407] ata1.00: cmd 61/e0:60:e8:91:8d/02:00:0e:00:00/40 tag 12 ncq 376832 out [ 313.156407] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 313.171818] ata1.00: status: { DRDY } [ 313.175685] ata1.00: failed command: WRITE FPDMA QUEUED [ 313.183193] ata1.00: cmd 61/08:68:08:70:c9/00:00:0d:00:00/40 tag 13 ncq 4096 out [ 313.183193] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 313.199036] ata1.00: status: { DRDY } [ 313.202924] ata1.00: failed command: WRITE FPDMA QUEUED [ 313.208289] ata1.00: cmd 61/10:70:08:71:c9/00:00:0d:00:00/40 tag 14 ncq 8192 out [ 313.208289] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 313.223447] ata1.00: status: { DRDY } [ 313.227240] ata1.00: failed command: WRITE FPDMA QUEUED [ 313.232591] ata1.00: cmd 61/18:78:00:71:ca/00:00:0d:00:00/40 tag 15 ncq 12288 out [ 313.232591] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 313.247662] ata1.00: status: { DRDY } [ 313.251549] ata1.00: failed command: WRITE FPDMA QUEUED [ 313.256889] ata1.00: cmd 61/70:80:20:71:ca/00:00:0d:00:00/40 tag 16 ncq 57344 out [ 313.256889] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 313.272041] ata1.00: status: { DRDY } [ 313.275812] ata1.00: failed command: WRITE FPDMA QUEUED [ 313.281135] ata1.00: cmd 61/08:88:70:71:c9/00:00:0e:00:00/40 tag 17 ncq 4096 out [ 313.281135] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 313.296098] ata1.00: status: { DRDY } [ 313.300047] ata1.00: failed command: WRITE FPDMA QUEUED [ 313.305527] ata1.00: cmd 61/08:90:40:72:c9/00:00:0e:00:00/40 tag 18 ncq 4096 out [ 313.305527] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 313.320429] ata1.00: status: { DRDY } [ 313.324159] ata1.00: failed command: WRITE FPDMA QUEUED [ 313.329454] ata1.00: cmd 61/08:98:50:72:c9/00:00:0e:00:00/40 tag 19 ncq 4096 out [ 313.329454] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 313.344352] ata1.00: status: { DRDY } [ 313.348158] ata1.00: failed command: WRITE FPDMA QUEUED [ 313.353447] ata1.00: cmd 61/08:a0:88:72:c9/00:00:0e:00:00/40 tag 20 ncq 4096 out [ 313.353447] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 313.368327] ata1.00: status: { DRDY } [ 313.372045] ata1.00: failed command: WRITE FPDMA QUEUED [ 313.377328] ata1.00: cmd 61/08:a8:f8:81:c9/00:00:0e:00:00/40 tag 21 ncq 4096 out [ 313.377328] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 313.392191] ata1.00: status: { DRDY } [ 313.395924] ata1.00: failed command: WRITE FPDMA QUEUED [ 313.401198] ata1.00: cmd 61/08:b0:08:82:c9/00:00:0e:00:00/40 tag 22 ncq 4096 out [ 313.401198] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 313.416064] ata1.00: status: { DRDY } [ 313.419805] ata1: hard resetting link [ 313.724405] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 313.734332] ata1.00: configured for UDMA/133 [ 313.734521] ata1.00: device reported invalid CHS sector 0 [ 313.734586] ata1.00: device reported invalid CHS sector 0 [ 313.734600] ata1.00: device reported invalid CHS sector 0 [ 313.734614] ata1.00: device reported invalid CHS sector 0 [ 313.734628] ata1.00: device reported invalid CHS sector 0 [ 313.734647] ata1.00: device reported invalid CHS sector 0 [ 313.734660] ata1.00: device reported invalid CHS sector 0 [ 313.734672] ata1.00: device reported invalid CHS sector 0 [ 313.734684] ata1.00: device reported invalid CHS sector 0 [ 313.734696] ata1.00: device reported invalid CHS sector 0 [ 313.734709] ata1.00: device reported invalid CHS sector 0 [ 313.734720] ata1.00: device reported invalid CHS sector 0 [ 313.734862] ata1: EH complete [ 369.084863] ata1.00: exception Emask 0x0 SAct 0x3e000000 SErr 0x19d0000 action 0x6 frozen [ 369.102732] ata1: SError: { PHYRdyChg CommWake 10B8B Dispar LinkSeq TrStaTrns } [ 369.114555] ata1.00: failed command: READ FPDMA QUEUED [ 369.123593] ata1.00: cmd 60/00:c8:00:d9:cf/02:00:0e:00:00/40 tag 25 ncq 262144 in [ 369.123593] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 369.139596] ata1.00: status: { DRDY } [ 369.143463] ata1.00: failed command: READ FPDMA QUEUED [ 369.148765] ata1.00: cmd 60/00:d0:00:db:cf/02:00:0e:00:00/40 tag 26 ncq 262144 in [ 369.148765] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 369.163993] ata1.00: status: { DRDY } [ 369.167884] ata1.00: failed command: WRITE FPDMA QUEUED [ 369.173247] ata1.00: cmd 61/30:d8:c8:70:4d/00:00:10:00:00/40 tag 27 ncq 24576 out [ 369.173247] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 369.188324] ata1.00: status: { DRDY } [ 369.192119] ata1.00: failed command: WRITE FPDMA QUEUED [ 369.198385] ata1.00: cmd 61/48:e0:78:95:8d/01:00:0e:00:00/40 tag 28 ncq 167936 out [ 369.198385] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 369.213934] ata1.00: status: { DRDY } [ 369.217715] ata1.00: failed command: WRITE FPDMA QUEUED [ 369.223089] ata1.00: cmd 61/10:e8:20:71:4d/00:00:0b:00:00/40 tag 29 ncq 8192 out [ 369.223089] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 369.240939] ata1.00: status: { DRDY } [ 369.245027] ata1: hard resetting link [ 369.550040] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 369.559728] ata1.00: configured for UDMA/133 [ 369.561358] ata1.00: device reported invalid CHS sector 0 [ 369.562790] ata1.00: device reported invalid CHS sector 0 [ 369.562875] ata1.00: device reported invalid CHS sector 0 [ 369.563818] ata1.00: device reported invalid CHS sector 0 [ 369.563884] ata1.00: device reported invalid CHS sector 0 [ 369.565652] ata1: EH complete [ 406.031745] ata1.00: NCQ disabled due to excessive errors [ 406.032006] ata1.00: exception Emask 0x0 SAct 0x78000 SErr 0x19d0000 action 0x6 frozen [ 406.058157] ata1: SError: { PHYRdyChg CommWake 10B8B Dispar LinkSeq TrStaTrns } [ 406.069755] ata1.00: failed command: READ FPDMA QUEUED [ 406.075409] ata1.00: cmd 60/08:78:d8:2e:cf/00:00:0e:00:00/40 tag 15 ncq 4096 in [ 406.075409] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 406.090407] ata1.00: status: { DRDY } [ 406.094612] ata1.00: failed command: WRITE FPDMA QUEUED [ 406.099992] ata1.00: cmd 61/00:80:c8:96:8d/04:00:0e:00:00/40 tag 16 ncq 524288 out [ 406.099992] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 406.115215] ata1.00: status: { DRDY } [ 406.119013] ata1.00: failed command: WRITE FPDMA QUEUED [ 406.124372] ata1.00: cmd 61/00:88:c8:9a:8d/04:00:0e:00:00/40 tag 17 ncq 524288 out [ 406.124372] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 406.140524] ata1.00: status: { DRDY } [ 406.144575] ata1.00: failed command: WRITE FPDMA QUEUED [ 406.149994] ata1.00: cmd 61/70:90:c8:9e:8d/03:00:0e:00:00/40 tag 18 ncq 450560 out [ 406.149994] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 406.165201] ata1.00: status: { DRDY } [ 406.168973] ata1: hard resetting link [ 406.473325] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 406.483575] ata1.00: configured for UDMA/133 [ 406.483859] ata1.00: device reported invalid CHS sector 0 [ 406.484198] ata1.00: device reported invalid CHS sector 0 [ 406.485546] ata1.00: device reported invalid CHS sector 0 [ 406.485806] ata1.00: device reported invalid CHS sector 0 [ 406.486996] ata1: EH complete [ 438.031428] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x19d0000 action 0x6 frozen [ 438.048460] ata1: SError: { PHYRdyChg CommWake 10B8B Dispar LinkSeq TrStaTrns } [ 438.065440] ata1.00: failed command: READ DMA [ 438.070181] ata1.00: cmd c8/00:08:f0:ad:d0/00:00:00:00:00/ee tag 6 dma 4096 in [ 438.070181] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 438.085316] ata1.00: status: { DRDY } [ 438.089209] ata1: hard resetting link [ 438.397081] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 438.420392] ata1.00: configured for UDMA/133 [ 438.427927] ata1.00: device reported invalid CHS sector 0 [ 438.429982] ata1: EH complete root@tegra-ubuntu:/home/ubuntu#