# 
# This ini file is used to configure emulator.exe 
#
# Hints:
# ------
# Store this ini file into the directory where the emulator.exe is located!

[Module type]
# Define the used module type
ModuleType=TC65

[COM parameter]
# Define the COM-Port used for MES functions and debug initial string
# Define the Baudrate used for the debug initial string
# all other setting are fixed: 8 bits, no parity, 1 stopbits
Port=COM1

#possible range: 110 ... 256000
Baudrate=115200


[AT command]
# These AT commands are used for initialising the module for debugging!
# Hints:
# ------
# The IP address range 10.x.x.x is not supported for configuration of debugging!
AT-Cmd1=S:ATE1
AT-Cmd2=R:OK
AT-Cmd3=S:at+cpin?
AT-Cmd4=R:+CPIN: READY
AT-Cmd5=R:OK
AT-Cmd6=S:at^scfg=userware/debuginterface,"192.168.0.2","192.168.0.1","0"
AT-CMd7=R:^SCFG: "Userware/DebugInterface","192.168.0.2","192.168.0.1","0"
AT-Cmd8=R:OK
AT-Cmd9=S:at^scfg=userware/mode,"debug","a:/","2000"
AT-Cmd10=R:^SCFG: "Userware/Mode","debug","a:/"," 2000"
AT-Cmd11=R:OK
